HotButtons Ver2.2

<What is HotButtons ?>
"HotButtons" is an application launcher.
 - Easy setup
 - Simple operation
 - Quick launch
It is very useful that four hardware buttons with Palm devices.
However, there are many applications for assign these buttons.
"HotButtons" is a software for increase hardware buttons easily.

<Movement environment>
This software works only with CLIE which the PalmOS 5.0 or later.
A vertical wide LCD model is recommended.
ex: PEG-TH55, PEG-NX60, PEG-NX70V, PEG-NX73V, PEG-NX80V, PEG-NZ90

<Installation>
For using HotButtons, you must install 2 files to your Handlheld.
 (1) HotButtons.prc
 (2) HotButtons_enUS.prc
If it double-clicks on "HotButtons.prc" and "HotButtons_enUS.prc"
on the PC, it will be installed to the Palm device at the time of
the next HotSynk.
Or, use the installation tool of PalmDesktop.
* Note *
"HotButtons.prc" is a main program file but it has only Japanese
characters. If you need to run this software on an english device,
you must install "HotButtons_enUS.prc" at the same time.

<The convenient way of using>
It is convenient when HotButtons is assigned to a hardware button.
It can be assigned with the next process.
 (1) Tap a "Preferences" icon from standard launcher.
 (2) Select "Buttons" panel from the upper right list.
 (3) "HotButtons" is assigned to a hardware button.

<Basic operations>
At first, "application" or "preference panel" or "shortcut icon"
is assigned to each of the buttons (max:fourteen).
Next time, an application and so on assigned by tapping each button
is launched.
There are three ways for open the configuration screen.
 (1) A menu "Setting of buttons" is chosen.
 (2) It tapped a un-assigned button.
 (3) Slide the stylus pen on the button which has been assigned.

<Copyright>
HotButtons is a freeware.
Kiyoto Higuchi has the copyright of this software.

<address>
Make contact to the following mail address if there are a problem,
a remodeling request, and so on.
 <Khiguchi@dp.u-netsurf.ne.jp>