|(3) Technical Specifications:|
|Name||H & H2 Detector|
|Desination||Portable Digital Hydrogen Detector|
|Specificity|| Selective for Active Hydrogen (H)
Molecular Hydrogen (H2)
|Operation in Ambient temperature||0°C to 40°C|
|Purge cycle (Initial test)||60 seconds|
|Recycle (recovery) time||30 seconds|
|Atomic Hydrogen(H) and
molecular hydrogen(H2) readout format
|mg per litre|
|Operational range of measurement||0.01mg to 2.44mg/litre|
|Accuracy||better than ± 5%|
digit red LED display indicates the concentration
of Atomic Hydrogen (H) and molecular hydrogen (H2)
level, from '000' to '2.44' in increments of 1mg/litre
Characters are 8.0mm high and 4.0mm wide
|Response Time||Instantaneous : 0.1 second|
|Warm-up Time||none - ready for immediate use|
|Power supply|| takes four UM-3 or "AA"
Batteries suitable for use in H & H2 Detector
is the Alkaline type only.
|Battery Capacity|| Lasts up to 11 hours, using Toshiba's
Alkaline Batteries. Display flashes and shows 'BAD'
when battery voltage is low.
|Battery pack|| Slide open the battery compartment door
at the back
of the device and insert four "AA" Alkaline Betteries.
|Complete package includes|| 1) Colour box
2) Operating manual
|Warranty||12 months from delivery|
|Size|| L 17.45cm x W 4.00cm x H 4.54cm
(6.87in x 1.57in x 1.79in)
|Weight|| approximately 85 grams (2.99
approximately 190 grams (6.70 ounces),
including four "AA" batteries