Hand made 300mm Disk Sander.I use the old motor attached to wood lathe (WT-300).Making story

Powered Plane P-20 by HITACHI. The main specification 100V,460W, Blade 82mm,15000rpm.

DC-90R by KERV. The main specification 100V,1 HP, 21m³/min.Dust collector system

JT160 by DELTA. The main specification 100V,1.5HP,Blade 156mm,Table size 157�~762mm.

The scroll saw by Asahi kouki Co Ltd.Model AK35.It is very Good!!. After that, I installed dust collector hose in the top and the bottom of the table.Dust collector system

I made the polish machine of the chisel. It remodeled an old grinder.Detail

I remodeled 135 mm of Makita1804K into the bench type Jointer.Detail

The threading set of Beall tool Co.. It a Good!!

The Power woodcarver. by Tokyo Automach. HHD-10.Light weight (415g), easily handled by fingers yet with high power! Can be safely used even at home.

The Power Chan saw.by Ryobi CSN360-N. This is an old-type 20 year or more. I maintained this recently. I think that it can still use it.

The belt grinder by Hitachi.BGM-50.I mounted in the frame of band saw.

This portable plane was ranked as the higher rank of my Wish List. As for the reason, its weight is only 27 kg.Detail

I bought Dustcollector nozzle and a perforator wallop for MS-350 at RAKUTEN. From now, the sunding work is unnecessary to the mask.

This ear-muff is made by Peltor company in Sweden.It is the product which is used in the noise environment that the reliability is much high.

Biscut Joiner System by Vermont American.Biscuit joinery is stronger and can replace many conventional wood joining methods.

Router Dovetail Jig by Vermont American. Makes Tricky Dovetailling easy.It is possible to use to the 200 mm width.

I got a speed controller for the ventilator from my friend. It seems that it is possible to use for a 800W Power tools.

Grinder. 150*19mm. I made a grinding jig for gouge. Please, click a photograph.Detail

Wood lathe by NAKATOMI. Model WT-300. The price is low but I think that it is easy to be used. Let's see Wood turning site.Detail

Band-saw by REXON. Model BS-10K.It's saw which is good about the cost performance.Please, click a photograph.Detail

The steam cleaner.I thought that there was not an use too much but it is convenience when bending a tree.

I received it from the friend.The cordless screwdriver & drill. HITACHI D10DG,WH8DB MAKITA 6903VD 9.6V All.

Slide Saw.It is C7FSH of HITACHI.As for this model, the work efficiency becomes good frightfully because the position of the India ink line can be confirmed with the laser.

I had diamond Trimer.It is NO.28511 of PROXXON.I am the good tool where it is possible to shave glass, metal and timber.

I get Trimer from the friend.It is M6 of HITACHI.It is the tool which is easy to use with the aluminum body, being small powerfulness and then.

I got this Trimer stand, too, from the friend.I am installing the dust catch duct of the pet bottle.Detail

The left is HITACH Co. D-6B. It bought 20 years before. The right is the impact screwdriver of RYOB Co. DD-10v. Below, it is the one to have used the motor of the sewing machine and it is using for the equal to or less than 1 mm perforator.

The drill press of TOSHIBA Co. which was bought at 8900 yen.DEP-13B. 13 mm chuck is attached.

The table jigsaw. AG-4 of HOME-TOOL Co.. It is cheaply sold.However, the table is safe even if it handles violently because it is solid. It is for the fault that the tension is difficult to adjust.

The jigsaw. JS-16 of HOME-TOOL Co.. Because the installation of the handsaw blade is superficial, I reform and am using an attachment.

The circular saw which is made in Hitachi Co. FC-6B. It is using ƒÓ165 chip saw. It is easy to use and it is possible to cut a handsaw, too, well.

The disk grinder, AG-4 which is made from HOME-TOOL Co.. In Japan, it is called Sunder. Let's always wear protection glasses.

The sunder, MS-350 made RYOBI Co.. Power's a little being insufficient but it is the tool of the necessity. I wants to mount an exhaust duct.

The maker is unknown. This, too, is the one to have picked up. The big one is the size which is impossible but is good exactly as much as the drill polish.

The father picked up this planer to me. I exchange and am using a blade. It is a well sharp planer. MAKITA Co.. 1804K 136mm

I have two big and small. The bigger one bought at 6800 yen. It is possible to absorb to be mud, water and the others, too.