Danish Submachine Gun


◇History and Comments◇
  The Madsen M1950, usually known as M-50 or M/50, is a Danish submachine gun adopted in 1950 . It was produced by the Danish company Dansk Industri Syndikat, located in Copenhagen, Denmark. The company was also known as Madsen after its founder Vilhelm Herman Oluf Madsen.
  The M1950 is made of stamped sheet metal. Its an open-bolt design which means it fires when the bolt is in the locked back open position with a fixed firing pin. The M1950 has a unique design: the firearm is stamped from 2 pieces of sheet metal which are shaped with an integral rear pistol grip and magazine housing. The two pieces fit together like a clam shell with the hinge at the rear of the pistol grip. The firearm is held together with a barrel locking nut which is threaded onto the fore section of the two receiver halves. The pistol grip is hollow, providing storage space for a magazine loading tool. The folding stock is made of tubular steel covered with leather and folds onto the right side of the firearm. The M1950 fires in full-auto only features a safety lever unusually placed in front of the forward magazine housing. To fire the M1950 the operator must grip the magazine housing and hold down the safety lever. (from Wikipedia, edited by the web master)
  The modelgun of M1950 was released by Hudson Industory in 1980. The outer parts and inner mechanism were designed just like its real model with the best consideration to safe use of it as a modelgun. The receiver and most of the other main outer parts are made of zinc alloy, or zinc dicast, in order to match the restriction of modelgun materials so that it cannot be illegally remade as a real gun. Despite of some weak parts which are easily broken because of their material problems, the M1950 is a fine modelgun which will give you a good opportunity to enjoy its mechanism, blowback firing, and looking.


Madsen M1950 Submachine Gun Cal. 9mm (Hudson, early production, zinc alloy, Piston Fire blowback, 3,310g)

 実銃は、その名前からもわかるとおり、第2次世界大戦後の1950年にデンマーク軍に制式採用された同国のマドセン社製サブマシン・ガンである。ミリタリー・ユースを前提にしたフル・オート・オンリーのシンプルな構造から、本国以外にもインドネシア、エルサルバドル、コロンビア、ブラジル、ベネズエラ、グァテマラ等の中南米国に輸出され(ブラジルでは後に45口径のものが国産された)、その国の軍隊に制式採用されている。M1950の最大の特徴は、徹底した低コストを目指して設計されたことで、グリップ一体型のレシーバーは左右の2枚鋼枝からプレス加工で作られ、小部品もプレスとリベットによる組み立てが採用されている。一方、安全性にも十分配慮が払われ、シアー固定のセイフティーの他に、グリップ・セイフティーがマガジン・ハウジングの後ろに付いている。
 モデルガンは、1981年にハドソンより発売された。他のどのメーカーも手を出さないデンマーク製のサブマシン・ガンを選んだあたりはハドソンの真骨頂と言えるであろう。外観及び内部メカニズムは実銃に忠実に作られており、実銃の持つ雰囲気と作動の味の両方を楽しめるモデルとなっている。特に、実銃ではスチール製であるレシーバーは、亜鉛合金製でありながら左右貼り合わせの“モナカ構造”とプレス成型の雰囲気がしっかりと再現されている。バレル・ロックを回してはずせば後部のヒンジを軸に本体が真っ二つに開いてしまう様は圧巻である。ただし、ヒンジ部分は亜鉛合金製であるために破損してしまうことが多く、本品でもその問題が発生している(割れた部品は接着してある)。発火方式はハドソン独自のピストン・ファイヤー・カートリッジが用いられるブローバックで、オープン・ボルトとダブル・カラム&シングル・フィードのマガジンにより比較的快調な作動が楽しめたという。
 発売当時は一部のコアなマニアに歓喜の声で迎えられたというが、実銃がほとんど知られていないモデルであったために、モデルガンとしての人気はあまりなかった。後にキット・モデルが出されたりした時期もあったが、それでも人気を獲得するまでは至らなかったようで、90年代半ば頃には絶版になってしまい、2000年代になるとカタログからも姿を消してしまった。過去のモデルを少量ではあるが再販し続けてくれているハドソンの製品だけに、本モデルが再販されることを切に願わざるを得ない。


Click here to return to the menu page.